02 9541 3500
ASAP 2020 Plus Surface Area and Porosimetry System
Micromeritics ASAP 2020 Plus provides high-quality surface area, porosity, and chemisorption isotherm data for materials analysis.
| Manufacturer | Micromeritics |
|---|---|
| Product Series | Micromeritics ASAP |
| Measurement principle | Chemisorption, Physisorption |
| Application | Surface Area & Porosity |
| Pressure measurement range | 0 to 950 mmHg |
| Pressure measurement accuracy | > 0.15% of reading |
Avestin Emulsiflex B15
The Avestin Emulsiflex B15 cell disruptor is an air powered, French Press style, high pressure Homogeniser that rapidly disrupts cells while avoiding over processing and protein damage.
| Manufacturer | Avestin |
|---|---|
| Product Series | Emulsiflex |
| Measurement principle | High Pressure Homogenisation |
| Application | Cell Lysis - Rupture |
| Homogenising pressure | up to 45,000 psi (310 MPa) |
| Throughput | 15ml |
Avestin Emulsiflex C3
The Avestin Emulsiflex C3 is a lab scale, electric motor driven, high pressure homogeniser that rapidly reduces particles and droplets from micron to nanometer sizes.
| Manufacturer | Avestin |
|---|---|
| Product Series | Emulsiflex |
| Measurement principle | High Pressure Homogenisation |
| Application | Emulsions, Liposome Processing & Mixing |
| Homogenising pressure | up to 30,000 psi (207 MPa) |
| Throughput | 3 Litres/hr |
Avestin Emulsiflex C5
The Avestin Emulsiflex C5 is a lab scale, air driven, high pressure homogeniser that rapidly reduces particles and droplets from micron to nanometer sizes.
| Manufacturer | Avestin |
|---|---|
| Product Series | Emulsiflex |
| Measurement principle | High Pressure Homogenisation |
| Application | Emulsions, Liposome Processing & Mixing |
| Homogenising pressure | up to 30,000 psi (207 MPa) |
| Throughput | 1 to 5 Litres/hr |
Ayriis 3D Contact Angle
Ayríís uses novel 3D Contact Angle technology to quickly evaluate the wettability of pretreated, cleaned, or coated surfaces.
| Manufacturer | KRUSS |
|---|---|
| Product Series | KRUSS Drop Shape Analyser |
| Measurement principle | 3D contact angle |
| Application | Surface Tension - Contact Angle |
| Illumination | 90 high power LEDs + 2 lasers |
| Dosing system | water single pressure dosing, 0.1 μL resolution |
BP100 Bubble Pressure Tensiometer
BP100 Bubble Pressure Tensiometer analyses the mobility of surfactants based on dynamic surface tension to optimise formulations used in spraying, coating, printing, or cleaning processes.
| Manufacturer | KRUSS |
|---|---|
| Product Series | KRUSS Tensiometer |
| Measurement principle | Dynamic surface tension (SFT) |
| Application | Surface Tension - Contact Angle |
| Temperature range | -10 to 130 °C |
| Range (surface tension) | 10 to 100 mN/m (resolution 0.01 mN/m) |
BPT Mobile bubble pressure tensiometer
BPT Mobile Bubble Pressure Tensiometer provides a one-click check of the surfactant content in baths and monitors surface tension changes while dosing.
| Manufacturer | KRUSS |
|---|---|
| Product Series | KRUSS Tensiometer |
| Measurement principle | Dynamic surface tension using the Laplace pressure of a gas bubble at a capillary in a liquid |
| Application | Surface Tension - Contact Angle |
| Temperature range | 0 to 100 °C |
| Min. recommended sample volume | 15 mL |
CellBox Live Cell Shipper
The CellBox portable CO2 incubator allows the transport of live cell cultures, tissue and other cell-based samples without the need for freezing, thawing and recovering cells - samples arrive ready to use!
| Manufacturer | Cellbox Solutions |
|---|---|
| Product Series | Cellbox |
| Measurement principle | Microscopy - Cell image analysis |
| Application | Live cell image analysis |
| Incubation temperatures | 28-38°C |
| CO2 Concentration | 0-20% |
DFA
DFA
| Manufacturer | KRUSS |
|---|---|
| Product Series | KRUSS Foam Analyser |
| Measurement principle | Tensiometry - Force & Optical |
| Application | Surface Tension - Contact Angle |
| Illumination | LED |
| Wavelength | 469 nm (optional IR: 850 nm); 633 nm FSM model |
DSA100 Drop Shape Analyser
DSA100 is a high performance Drop Shape Analyser that enables static and dynamic contact angle measurements on solid surfaces and measurement of the surface tension of liquids.
| Manufacturer | KRUSS |
|---|---|
| Product Series | KRUSS Drop Shape Analyser |
| Measurement principle | Surface tension and liquid-liquid interfacial tension using pendant drop or constrained sessile drop |
| Application | Surface Tension - Contact Angle |
| Temperature controlled | -30 to 400 °C |
| Illumination | High power monochromatic LED |
Looking for the most suitable analytical system for your project?
Call us directly on 02 9541 3500 for a free consultation, browse our extensive range online or find the right instrument with our easy to use Product Finder
Browse product range Request FREE Consultation